GEPRC Mark5 Pro DC O3 Frame – Emerald Green

About this product
The GEPRC Mark5 DC Pro Frame has a newly upgraded 7075-T6 aluminum alloy camera side plate. This drone is fully adapted to carry DJI’s new O3 camera. Specially designed TPU parts were designed for mounting the O3 VTX module, equipped with an air inlet cooling port, which is conducive to adequate heat dissipation. The DC structure has a wide and unobstructed viewing angle during flight, which is suitable for O3 internal video recording and direct output. MARK5 O3 is shipped with two different camera mounts, which can be mounted with a full range of GoPro action cameras, as well as Naked GoPro 8/10, Insta 360 GO2 and Caddx Peanut, etc. to record beautiful moments for your flight.

Note: This pro version comes with 3D-printed skids to protect the motors and camera, as well as action camera mounts.

VIDEO: New GEPRC MARK 5 HD O3 is a Dream to Fly! Review

Features
Mounted a full range of GoPro cameras, as well as Naked GoPro 8, Insta 360 GO2, and Caddx Peanut cameras
DC structure is suitable for O3 internal recording when no propeller is visible during flight
Developed specifically for freestyle with deadcat squashed X-arm design
Pro version frame includes 3D-printed skids
Upgraded lens aluminum alloy side plate
Independent capacitor and buzzer cabin
Shock absorption design
Emerald Green version
Specifications
FC mounting holes: 30.5mm x 30.5mm
Dimension: 214mm x 168mm x 42mm
Suitable propeller size: 5″propeller
Camera installation space: 20mm
Pro Version Weight: 156.1g
Bottom plate: 2.5mm
Wheelbase: 225mm
Top plate: 2.5mm
Arm plate: 5mm
Includes
FRAME

1x 2.0mm front protection plate
1x 2.5mm front bottom plate
1x 2.5mm rear bottom plate
1x Camera aluminum part
1x 2.0mm small top plate
1x 2.5mm large top plate
1x 5.0mm arm limit plate
2x 5.0mm front arms
2x 5.0mm rear arms
1x Set of screws
3D PRINTED PARTS

1x Camera vibration reduction mount
1x Naked GP 8 camera Base
1x VTX antenna mount
1x TBS antenna mount
1x GP camera mount
4x Motor shock pads
1x O3 VTX mount
1x Front protector
1x Buzzer Holder
ACCESSORIES

8x M3x8 flight controller shock-absorbing ball
1x EVA camera base (with backrest)
OTHER ACCESSORIES

1x 1.5mm L-type screwdriver
1x 2.0mm L-type screwdriver
1x 3.0mm L-type screwdriver
1x M15x250 Batteries straps
2x M20x250 Batteries straps
4x 10x50mm Motor hubs
1x 3M double-sided tape
2x Battery non-slip mat
1x EVA camera base
1x Antenna fixed tube
1x M8 Wrench