Product Description
About this product
The CineLog 35 V2 features a DJI O3 VTX, main carbon plate, and injection protection frame with an increased 7075 aluminum column for structural strengthening. The battery mounting uses a tie with 7075 aluminum parts fixed, and the power XT60E1-M plug is integrated with the carbon plate for convenient application. The protective frame for O3 Air Unit adds a memory card and USB port for easy data reading. Equipped with F722-45A AIO and the new SPEEDX2 2105.5 motor, this drone has more power with an aggressive system and faster response. This is a 3.5-inch HD FPV cinematic FPV drone that integrates cinematic, freestyle, leisure, and safety to meet the user’s requirements for flying and filming various scenes indoors and outdoors. This version comes with a GPS.
Features
- Strengthened carbon plate, hollow design, injection protection frame, and noise reduction design
- Propeller Guard adds memory card and USB ports to O3 Air Unit for easy data reading
- O3 camera is designed with an independent under-hanging shock absorption gimbal
- GEP F722-45A AIO V2 high-performance flight controller
- SPEEDX2 2105.5 motors with HQ DT90 propellers
- Carefully tuned 3.5-inch HD cinematic FPV drone
- 7075 aluminum parts are fixed, solid and stable
- XT60E1-M Power Cable
- GPS included
Specifications
- Receiver: PNP, GEPRC ELRS 2.4G, TBS Nano RX
- CineLog35 V2 HD O3 TBSNanoRX weight: 285.8g
- Motor: SPEEDX2 2105.5-2150KV（6S）
- OSD: Betaflight OSD w/AT7456E chip
- FC system: GEP-F722-45A AIO V2
- Propeller: HQProp D-T90MM
- Model: Cinelog35 V2 HD O3
- MCU: STM32F722RET6
- Flight time: 5′00″ -8′ 30″
- Frame: GEP-CL35 V2
- GPS: Yes (GEP-M8U)
- Gimbal plate: 2.0mm
- Bottom plate: 1.5mm
- Antenna: 5.8G&2.4G
- Wheelbase: 142mm
- Gyro: ICM 42688-P
- Top plate: 3.5mm
- VTX: O3 Air Unit
- ESC: 8Bit 45A
- Camera: O3
Recommended (Not Included)
- XT-60 Batteries: 1050mah-1300mah
Includes
- 1x GEPRC CineLog 35 V2 3.5″ HD Cinewhoop Drone w/ DJI O3 + GPS – 6S (Choose Receiver)
- 1x L-shaped screwdriver (1.5mm)
- 1x Naked GoPro Mounting Base
- 1x L-shaped screwdriver (2mm)
- 1x L-shaped screwdriver (3mm)
- 2x HQProp D-T90MM（2 pairs）
- 2x M20*250mm battery strap
- 1x Antenna fixed tube (pair)
- 1x Antenna Mounting Base
- 1x GoPro Mounting Base
- 2x Battery Silicone Pads
- 1x Plastic Tweezers
- 1x Hardware Set
- 1x M5 wrench
- 1x Keychain
Specifications
Receiver: PNP, GEPRC ELRS 2.4G, TBS Nano RX
CineLog35 V2 HD O3 TBSNanoRX weight: 285.8g
Motor: SPEEDX2 2105.5-2150KV（6S）
OSD: Betaflight OSD w/AT7456E chip
FC system: GEP-F722-45A AIO V2
Propeller: HQProp D-T90MM
Model: Cinelog35 V2 HD O3
MCU: STM32F722RET6
Flight time: 5′00″ -8′ 30″
Frame: GEP-CL35 V2
GPS: Yes (GEP-M8U)
Gimbal plate: 2.0mm
Bottom plate: 1.5mm
Antenna: 5.8G&2.4G
Wheelbase: 142mm
Gyro: ICM 42688-P
Top plate: 3.5mm
VTX: O3 Air Unit
ESC: 8Bit 45A
Camera: O3
Recommended (Not Included)
XT-60 Batteries: 1050mah-1300mah
Includes
1x GEPRC CineLog 35 V2 3.5″ HD Cinewhoop Drone w/ DJI O3 + GPS – 6S (Choose Receiver)
1x L-shaped screwdriver (1.5mm)
1x Naked GoPro Mounting Base
1x L-shaped screwdriver (2mm)
1x L-shaped screwdriver (3mm)
2x HQProp D-T90MM（2 pairs）
2x M20*250mm battery strap
1x Antenna fixed tube (pair)
1x Antenna Mounting Base
1x GoPro Mounting Base
2x Battery Silicone Pads
1x Plastic Tweezers
1x Hardware Set
1x M5 wrench
1x Keychain
Reviews
There are no reviews yet.